corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Install problem » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Jdhazz

 posted on 5th Jul 06 at 19:44

i would check the pos wire isnt touching amp casing where it connects


Savinforcorsaproject

 posted on 24th Sep 03 at 19:31

Check + & - are in right place.
Also make sure u having got amp runnign at FULL Strength.


diddon

 posted on 24th Sep 03 at 19:28

have you put the wires in the right places


Sparco

 posted on 24th Sep 03 at 14:41

Basically my subs and amp were all up and running fine then i decided to build an install in the boot, did this and put my ice back together again. When i turned my the headunit on it blew the fuses in the amp, i've taken the install apart, checked the power and earth cables and nothing is kinked or cut into, plus the fuse on the power cable near the battery didn't blow, just the amp ones. Replaced the amp fuses and same thing happened, just blew as soon as power on headunit was turned on. So i'm stuck now, is it a problem with the amp? its just that it was fine then it wasn't and i can't find a reason! its a brand new amp, only had it running for two days and its been dead ever since.

Any ideas?