|
|
Juha GSi
|
posted on 18th Sep 03 at 16:37 |
how about the cheaper velos torqtube? should be good gains too but less £...
and absolutely get the inlet manifold first, then cams+others, cos inlet will make the best gains...
|
corsa120
|
posted on 18th Sep 03 at 16:31 |
LOOK MATE do not buy cams for your car yet they are not worth it as they dont work very well the the standard management your first mods should be a decent exhaust system and air filter then a lexmaul/mantzel/dbilas manifold as these engines have restrictive inlet manifolds, then get a janspeed exhaust manifold and then uprate the management with a unichip then if u feel the need get some cams
on a 1.4 16v with all the above without cams u should see a good 120bhp
thats 15 from an inlet manifold
5 from a exhaust manifold
4 from unichip
4 from ur exhaust
1 from air filter
these are all estimates an may vary
|
ffls
|
 posted on 18th Sep 03 at 16:26 |
In the UK, courtenay or PMC.
In my car with the addition of a superchip, it gave 25 bhp more and 5 nm of torque.
you should have to increase the fuel pressure for this type og result.
|
watson 1.416v
|
posted on 18th Sep 03 at 16:05 |
im getting a set of cams for my 1.4 16v, but where can i get a dblias or mantzel manifold for beter performence and how much bhp will it giv me boys?
|
