Oh yeh good point lol, it has the Red and White and it does have a video output for RCA on the connector, but whether it gives out a full video signal i dont know.



Can u seperate the wires as much as possible?

austin.....that cable...does it have the red white and yellow connectors??? cheers

update:

After looking into the noise a bit more i have found that when the ps2 is not connected 2 the inverter but the power cable is still right next 2 the rca cable i get only a tin buzzing..but as soon as the ps2 is connected the buzzing becomes very loud

ne ideas where 2 go now??

checked all earths they all good

I very much doubt they would do PS2 interconnects :P

or http://www.russandrews.com/ if you want to go for mentally good quality! They have some speaker cable on there for over £1000/m

Because the inverter runs at a high frequency if it is close to any signal cables or units then intereference is very likely.


You could try this cable, i have it and the quality is brilliant on it. As far as i can see its got some form of shielding but there is no guarantee its gonna work. But i reccomend these leads to anyone, they are fucking amazing compared to standard leads when it comes to RGB.

http://shop.gameplay.co.uk/tvg/productpage.asp?ProductCode=PT0169

tried that...no luck at all....but if i move the power cable away from ps2 i dont get it...so its obviously pickin up intereferance off the 240v via the ps2 sound cable....do they do shiled 1s??

lol i doubt it will work...but worth a try...brb wiv a result...

take the power cable out the ps2 and put it in the other way - work on mine (i know!!)

run speaker and power wires as far away as possible

oi u.....its all neat..running thru relays and stuff!!

YOUR DODGY WIRING :lol::P

when turned on i get a bad buzzing sound through the speakers,

is it because i have a standered battery and have 2 amps, a ps2 and inverter???

if not...where does the problem lie? cheers:thumbs: