|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » digi dash question? » Post Reply
|
cobra148 |
posted on 16th Sep 03 at 16:09 |
Heres a pic of the transducer. Depending on what car you have, you might be able to use the Corsas own speed sender to sample the pulses from. I used the original Corsa one in mine and the speedo is accurate. I got clocked by a speed camera at 38 and the speedo read 38 too:lol: | |
scottwheatley |
posted on 16th Sep 03 at 15:49 |
I am also wanting to fit a digi dash to my corsa. Can you please send to me aswell a pic of the transducer...... | |
cobra148 |
posted on 13th Sep 03 at 16:48 |
I've mailed a pic of a transducer to the address in your profile. Its too big to host in my garage and I don't know how to resize it. | |
stubbsy |
posted on 13th Sep 03 at 09:35 |
ttt | |
stubbsy |
posted on 12th Sep 03 at 16:41 |
cheers, where do i get the transducer from? or should it be with it? what does it look like? | |
cobra148 |
posted on 10th Sep 03 at 19:40 |
Nothing "needs" to be modified at all, you can fit the complete digi dash as it is, although because it is rectangular it will leave gaps in the curved Corsa dash space. See above, all you need are the two loom plugs and the transducer. | |
stubbsy |
posted on 10th Sep 03 at 18:53 |
what needs to be modified on the dash? also is just the digi dash and the sensors all i need? | |
cobra148 |
posted on 10th Sep 03 at 18:42 |
Not too difficult, the finished result will depend on how much work you put into it, although you can fit it in a couple of hours. | |
stubbsy |
posted on 10th Sep 03 at 18:00 |
is it a big job????? | |
stubbsy |
posted on 8th Sep 03 at 20:14 |
yeah will have a look at it if i see u down there, when u normaly go down? | |
hopper |
posted on 7th Sep 03 at 23:42 |
dont need ecu, but do have to modify the dash surrounds to get um fit. aint finished mine yet but if you want a look u might see me down fes in red sri with vectra sri wheels on | |
stubbsy |
posted on 7th Sep 03 at 18:48 |
right nice 1,may have to purchase it. how does it need to be modified to fit the corsa dash? | |
cobra148 |
posted on 7th Sep 03 at 18:47 |
You need the dash (obviously), both the black and white plugs from the rear of the dash. Try to get a good length of loom attached to the plugs. You'll also need the speed sensor (transducer) from the top of the gearbox, again, get as much wiring as you can attached to it. | |
corb |
posted on 7th Sep 03 at 18:45 |
never heard of the ecu thing before, fairly straight forward, i think! | |
stubbsy |
posted on 7th Sep 03 at 18:38 |
been offered a digi dash for £30 out of a astra gte with all sensors for fluid tanks etc. do i need the ecu? been told i do but arnt sure? also how easy are they to convert? |