To get the dials out, you need to get off the casing for the steering column.
Underneath the steering wheel there should be three holes with three screws in, take them out.

Then, sat looking toward the steering wheel, turn it till you can see two smaller screws close to the centre of the wheel, remove these also.


The column should now come apart (with a bit of fiddling) and you should see two screws at the bottom of the dials holding them in. There is also one screw on the roof of the dials holding them in. Its pretty easy from then :thumbs:

[Edited on 03-09-2003 by AustinPXX]

ok thanks mate, I know how to get the centre bit of the dash out but how do you get the dials out?? Looks a bit complicated!!

Cobra148 not Corb148 :lol:

It is backlit with 2 bulbs. Speak to Corb148 and get some blue Leds(with their holders) Looks suberb. Get 5-6 from him and change the bulbs behind the dials too. If it has the white dials it glows bright blue at night and looks cool as fcuk.:thumbs:

its a corsa c by the way

Is the clock and temp display in the centre of the dash back lit?? If so is it just a bulb that lights it and can it be changed??

Thanks
Mark:thumbs: