Monkey, yes, my blue dials had white markings on.

um my mate kev_corsa has done is and they all look a million times better than on that pic above. he has done the mfd and his dials.

u2u him im sure he will send u a pic

has anybody had any real success with changing the dash lights for the corsa c?:boggle:

hey guys,

i got 3 super bright leds behind my dash.....but my silver lockwood dials have a dark orange markings/numbers!!!!!!! so its very dull!!!!!!

im getting some green lockwood dials, which have got white markings/numbers so shud show fine.....

"cobra148" do your blue lockwood dials have white markings too???

my MDF looks the same in my C!i have 2 bright bits is there anyway that i could get the light to spread more evenly?

Si, have you got them in the dials too, if so, how does that look?

You have two "hot spots" there, the rest of the display should light as bright as them. I'm not familiar with the Corsa C, how many leds/bulbs fit it as standard, is it two the same as the B?

Here's mine. There not mega bright in the day.

Si, heres the spec on the 10k..

SOURCE MATERIAL InGaAIN
EMITTING COLOR Blue
LENS TYPE Water Clear
LUMINOUS INTENSITY (mcd) 10,000 mcd
REVERSE VOLTAGE 5V
DC FORWARD VOLTAGE 3.2 - 6.00
DC FORWARD CURRENT 20mA
OPERATING TEMPERATURE 40șC to 85șC
LEAD SOLDERING TEMP 260șC for 3 seconds
VIEWING ANGLE ± 30°

You have the same leds in yours as I've got in mine, is yours not as bright as this?


I'll u2u you about them in a sec.

quote:

---

Originally posted by cobra148
Heres what I'll do, I'll send you some 10000mcd blue leds, these are the brightest available and cost a lot more too.

---

quote:

---

Keep it a secret though 'cos everyone will want some otherwise

---

Mine where a bit dim in my MFD but they are ok, can still just about read it, and looks mint @ night! :D

corsa starter, I'll u2u you in a sec.
What colour are the numbers etc on silver dials? If they are white or transleucent, there shouldn't be a problem. I'm not familiar with silver dials, are they Lockwood?
This pic is of my dash when it had blue Lockwood dials, the numbers lit up fine...


In this pic, the rev counter is the original black factory one and the speedo is a blue Lockwood one, as you can see, they both light fine...


I'm assuming that the mfd is ok? The leds you have are the exact same ones as fitted to my dash. Heres what I'll do, I'll send you some 10000mcd blue leds, these are the brightest available and cost a lot more too. I'll send you them free of charge if you report back how they work with silver dials.
Keep it a secret though 'cos everyone will want some otherwise ;)

i got the ones rob supplies (cobra 148)

Have you got the ultra bright LED?? there are a few kinds out, some are bright but then there arte some ultra bright ones that are good for behind the dash so I am told.

well old dials are in pieces and new ones cost me 45 quidso aint changing them... what else can i use to make it blue and bright???

Tell ya what though i converted the clifford alarm flasher to a blue led looks sweet, except at night its so god dam bright its like having a strobe in the car.
When sat in a car park or on my drive way at night the whole interior is lit up by it!!!!

I got standard dials in my corsa with Blue LED conversion and they are well dull too, done the heater panel too and you carnt even see it

lol... had the exact problem with you matey. just fitted them on then......FCUK!!!! :lol: damn silver dials! lol:lol::lol::lol:

yeah with the std dials the blue led's r ok (could b a bit brighter) but with after market dials on top id imagine they would b very dull. did u damage the old dials? shure u could get the facia from a scrappy or sumfin, instead of the silver 1's

doh doh doh lol :D sorry dude u shud hav left the black 1s in i have lol the black show the blue leds through better then much lighter :D

they are well dull :( fitted silver dials at the same time but i cant read the numbers! help!