|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Too much bass going to my front components » Post Reply
|
drunkenfool |
posted on 16th Aug 03 at 18:22 |
i got some of those bass blockers running to my 6x9's, all sounds a lot better | |
Melville |
posted on 14th Aug 03 at 21:21 |
thanks for the advice guys, my head unit is sony cdx-mp40, its not distorting due to the h/u its just I would prefer more mid and treble to come out of them as my 6x9's are giving enough bass unitl I get a sub. | |
TOMAS |
posted on 14th Aug 03 at 18:52 |
You can buy 'crossover caps' that will cut the frequency from 80hz down. They are about a tenner and you solder them inline on you woofer wires. Bass blockers are the same thing, autoleads do them in Halfords etc. | |
Richie |
posted on 14th Aug 03 at 17:51 |
^^ also correct, but if u feel there is too much bass then try turning it down. | |
CORS4 |
posted on 14th Aug 03 at 17:39 |
what hd unit you got? | |
IntaCepta |
posted on 14th Aug 03 at 17:34 |
don't turn it all the way down. | |
Melville |
posted on 14th Aug 03 at 17:28 |
Thanks mate, altho if I turn the bass down it doesnt sound right if ya know what I mean | |
Richie |
posted on 14th Aug 03 at 12:17 |
Well if u got a good headunit it should have built in high pass filters. If not you will need to just turn the bass done on the headunit. | |
Melville |
posted on 14th Aug 03 at 11:29 |
I havnt got the best of systems at the minute as Im skint but Im running some components straight off the head unit and theres too much bass comming out of the mid drivers and its getting distorted. There pretty good JBL speakers but I think the problem is that there not connected via a crossover. The little tweeter has an inline crossover which looks like a resistor. Is there anyway I can get a similar thing to connect up so that theres not too much bass going to the mids?? |