corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » taking dash apart » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

whitter45

 posted on 13th Aug 03 at 10:02

cheers matey mine are electric driven too. nice one cheers for the info


Mistamist

 posted on 13th Aug 03 at 09:22

quite simple really

here goes

1- Undo the three screws around the instrument panel surround

2- undo te two screws holding the instrument pnel in place

3- Lift the clip at the top and he whole unit should slide out and bobs your uncle you can change the bulbs

you may have a cable conected too the speedo disconnect this if that is the case, i dont have one cos its run electrically.

good luck


whitter45

 posted on 13th Aug 03 at 09:09

can anyone gives me some instructuoins as to how i take the speedo and rev counter dash apart to fit new leds. looked in the tutorials but cant seem to find anything. any help appreciated paople. thanks for ur time:wave: