|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa C drilled airbox, new question added.... » Post Reply
|
jacko |
posted on 25th Jul 03 at 09:13 |
that's true. i have a pvd panel filter in mine and it doesn't make that much of a difference to the standard filter. | |
Gambit |
posted on 25th Jul 03 at 08:41 |
no it wont, what you hear now is what your gonna get with any panel filter, though a K&N may make it breath easier | |
Doug_SRi |
posted on 24th Jul 03 at 22:21 |
done it now.......my mate said it sounded like i had a sports back box coming down the road but i dont think so. I still have standard panel filter the now but am looking for a cheap decent one. there is a good but quietish noise up to 4krpm Will a k&n panel filter make it any louder in general and higher up the revs? Thanks | |
jacko |
posted on 24th Jul 03 at 19:08 |
I drilled mine on the left hand side of the pipe thingy. | |
SLSXi |
posted on 24th Jul 03 at 18:49 |
im sure your meant to drill them on the left hand side looking at the pic. drill on the side away from the engine - so it doesnt draw in the hot air. someone on here said about 8-10 holes 20mm in diameter will do. | |
Doug_SRi |
posted on 24th Jul 03 at 17:35 |
doesnt matter......i am just gonna drill the wholes in random places below where the filter sits | |
Doug_SRi |
posted on 24th Jul 03 at 17:31 |
| |
Chris P |
posted on 24th Jul 03 at 16:13 |
Y don't you take a picture of your own airbox and shop some holes into it? | |
Doug_SRi |
posted on 24th Jul 03 at 14:36 |
as title says.........i am planning to drill my airbox but want to see pics of other peoples first to know the best place to drill what size drill bits u use? i know there is a 'how to' guide buts its not for corsa C :( |