Thanks, I've already changed the sensor of the oil pressure and it is working proporly.

But I can't find the grey/green as for the astra (MK3) doesen't have it in this collor (I think)

I left them open so the dash is giving its full power, In the 2 years I am driving this corsa, I've never touched it so don't use it.

I will send some pics when it is done.


Thanks and greetz;)

The two green/grey wires on the Astra dash are for the dash (panel) lights, these need to be connected to the green/grey in the Corsa loom, also shared with white/yellow.
The blue/yellow on the Astra dash are for the oil pressure. You don't have oil pressure switch fitted on the Corsa, although I believe you can get this to work by fitting the appropriate sensor.

Yes, they are connected behind the switch of the lights, in the manual of the nove do I have to connect it together with the white/yellow, but it doesn't work:(

I can't remember what colours the Corsa loom is now, but is there a grey/green wire in the Corsa?

And where do I have to connect those 2 green/grey wires?

Did anybody has problems with their side repeaters.
I can go left, right, but he does nothing with all 4

Thanks;)

The blue/yellow is for the oil pressure gauge I believe.
The green/grey are for illuminating the dash, relay etc.

I've got everything working except on the cables of the original digi dash
I have 2 green/grey and one blue/yellow free.

I know that the 2 greens are for the illuminocity of the dash and the blue/yellow for the speedo but

My speedo is working and I don't know where to connect the green/grey cables.

I hope that somebody can undeerstand and help me.

Oh, one thing, I am using the complete wiring of the Astra MK3 because of the dash and the motor.;)