|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » cams/can followers » Post Reply
|
miles |
posted on 1st Jul 03 at 23:45 |
Oh, and the lifters will only damage the cams if it has run low on oil. | |
miles |
posted on 1st Jul 03 at 23:44 |
standard ones are about £6/7 each from autovaux. | |
corb |
posted on 1st Jul 03 at 18:33 |
mine went so i got some kent ones and some high lift cams whilst i was there! | |
luca2020 |
posted on 1st Jul 03 at 13:21 |
my hydrolic lifters are tapping their tits off, their worn but they cost like £14 for 1 lifter x 16 :( | |
Greasemonkey |
posted on 1st Jul 03 at 12:06 |
16 x Cam follower for a 16v GSI is £125 i would have bought them and fitted them myself in fact i think i might just do that mine are tapping too on my GSI | |
mad_mike |
posted on 1st Jul 03 at 11:32 |
yeh and i recon the cam is also knackerd, its in the garage now, hope it dont cost more than they said ! | |
luca2020 |
posted on 30th Jun 03 at 14:11 |
r u 100% sure its ur cam followers? | |
Corsa^Dan |
posted on 30th Jun 03 at 11:37 |
change followers? | |
mad_mike |
posted on 30th Jun 03 at 11:34 |
the cam followers have gone in my car, the engine makes a right tap. the cams might be ok but im going to have them changed at the same time. This lot is costing me about £150 fitted, is this worth it, its only a 1.2 8v, or should i get anouther engine from scrappy. ? |