|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » drilled airbox » Post Reply
|
Charlie12345 |
posted on 5th Aug 08 at 15:41 |
why not do it if a 1L? why has my orange EML light come on? | |
Born_corsa02 |
posted on 17th Jun 03 at 07:21 |
I cut a fuck off big hole in towards the wing side of my 1.4 16v SRI sounds the bollocks from 3k onwards | |
digitalbanana |
posted on 17th Jun 03 at 07:07 |
quote: Why not drill a 1ltr? I drilled mine, bit nippier and sounds good. | |
Kris TD |
posted on 16th Jun 03 at 23:28 |
yeah my next job is to run some cold air feeds, which i ahd to my induction kit. defo a much better option that an induction kit, the rear test will be next month when my car is on the rollers, i will do 2 runs, one with drilled airbox, other with induction kit too see whats best. | |
Scotty_B |
posted on 16th Jun 03 at 23:15 |
I have a Corsa C 1.4 SRi. Drilling the airbox and fitting a K&N replacement element filter, gives me the same noise as my previously fitted Piper induction kit did. | |
jm960326 |
posted on 16th Jun 03 at 23:15 |
I drilled mine with 4 large holes in the far side of it. Sounds so much better now! As KrisTD says dont drill the top, you'll wreck the engine if you do! | |
Kris TD |
posted on 16th Jun 03 at 23:08 |
quote: erm no that would defeat having an airbox in the first place. did mine the other day, on the bototm drivers wing side there is a huge bit which unclips, take that off and bin it, cut out the plastic sticks which add a bit of support, drill some holes on the wing side and wing side front. diod mine with an 8mm drill bit. soun ds pretty much like my induction kit except a little less hiss, defo has more torque and runs better than did with cone filter. thats with a new standard paper filter in too, not even a gucci one. | |
corsa_godfather |
posted on 16th Jun 03 at 22:50 |
take the whole box out drill the front left hand side(opposite engine) left hand side and underneath left hand side.dont drill above the filter!also wot size engine i ur car?dont do it if its a 1l 12v | |
koolkorsa |
posted on 16th Jun 03 at 22:34 |
just quickly wanna know how many and how big the holes i drill are? would i be alrite just drilling the top section, which lifts out easily. What sort of change in noise will i get. thanx |