|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » NEED HELP WITH CLOCKS-ANYONE » Post Reply
|
vauxtillidie |
posted on 10th Jun 03 at 16:29 |
i dunno bud, u cud be rite but like i sed i aint got a clue. | |
digitalbanana |
posted on 10th Jun 03 at 16:27 |
dont u have to connect it to ECU first?? | |
vauxtillidie |
posted on 10th Jun 03 at 16:01 |
the ignition coil is in the engine bay, open bonnet and luk on the rite hand side just above the headlight, shud be there but i dunno if it will have a connection for this wire or not as ive never had to do it b4 | |
Jafster |
posted on 10th Jun 03 at 15:58 |
so how do i connect it to the ignition coil is it under the sterring coloum?? | |
Jafster |
posted on 10th Jun 03 at 15:16 |
cheers vaux | |
vauxtillidie |
posted on 10th Jun 03 at 15:15 |
colurs from left to right as follows | |
vauxtillidie |
posted on 10th Jun 03 at 15:13 |
heres a pic mate but its not very clear soz, its the best my camera will do for some reason. its the 2nd wire from the left of the plug in the pic, theres a brown/blue wire to the left of it and a solid brown wire to the right of it | |
Jafster |
posted on 10th Jun 03 at 15:05 |
was thinkin of that -not sure what pin it would be on the back of the clocks though-but cheers anyway- | |
vauxtillidie |
posted on 10th Jun 03 at 14:59 |
u need to connect a green wire to the coil i think, my LS had the green wire in the plug strange how ur merit dont but thats vauxhall for ya! | |
Jafster |
posted on 10th Jun 03 at 14:52 |
right ive just turned my clocks over for a set with a rev meter -i gotta 1200 merit- and the rev meter doesnt work - there is no green wire in the loom-so thats probberly my problem -but is there another way aroun that...? |