|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Gettin 17's On?? » Post Reply
|
AdamF |
posted on 31st May 03 at 12:15 |
mine is lowered 60mm on 17s and it doesnt rub. think about it thhis way. the wheels might be bigger but the tyre is smaller so in effect 17s with 205/40 tyres are the same size as 14s with a 185/60 tyres which are standard on corsa sports etc anyway. just make sure they are et45 offset | |
John_C |
posted on 31st May 03 at 12:07 |
koni red suspension 4 whoever wanted 2 know :) | |
Makarus |
posted on 31st May 03 at 08:53 |
quote: If your having 17's with 205/40 tyres then you dont want ET49 wheels as they will rub against the suspension, you want around ET45 should get a 40mm drop fine, if you wanna carry more people than just front passengers then you will have to debolt your rear arches but ET45 shouldnt give you many problems, I am on ET45 15's with a 60mm drop and can carry 5 people in the car and not get rubbing. | |
jaffa |
posted on 30th May 03 at 23:50 |
they will be fine just debolt the arches - take the arches off and glue them back not bolt them back on | |
Anton2K3 |
posted on 30th May 03 at 20:59 |
They ET 45. Hopin i won't have to do much to it. | |
Dan16v |
posted on 30th May 03 at 19:37 |
id say youll have no problem with 40mm as long as theyre ET49, although if u want a few people in the back u might wanna take the screws out that hold the plastic arch on. Just did the front arches for mine today (17s, -60mm, et49) WHAT A PAIN IN THE ASS!!!! no more rubbin tho. :D | |
NOT_finshed_yet!! |
posted on 30th May 03 at 17:58 |
i lowered mine 40mm.and i had a little trouble with rubbing on the front around bends i just trimmed back the metal a 1/2" and took the lip off the plastic trim took all but 2 bolts off on each trim and added some glue to keep the things on seems ok now | |
ANDY1.4 |
posted on 30th May 03 at 16:00 |
What lowering kit u got john_c? | |
Russ2k2 |
posted on 30th May 03 at 14:30 |
whats the offset of ya wheels mate? | |
John_C |
posted on 30th May 03 at 14:21 |
i didn't do ne and i lowered 40mm apparently, bk et45 :thumbs: | |
Anton2K3 |
posted on 30th May 03 at 14:17 |
Anyone know how much work i gotta do to get em on with lowered 35mm? |