|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Fitting Irmscher Locking Pins » Post Reply
|
Jason Iles |
posted on 16th May 03 at 10:08 |
As the guy above said I took mine off this way without touching the door card :thumbs: | |
leafgreencorsa |
posted on 16th May 03 at 09:20 |
Thanks for that. | |
paul_spurrell |
posted on 16th May 03 at 09:19 |
like stu said you dont need to take the door card off. just prise off the orange clip on the old one then pull off | |
Stu_22 |
posted on 16th May 03 at 08:57 |
I guess the corsa C would be the same as B if so wedge the red plastic bit off of the pin and it should then just pull off | |
leafgreencorsa |
posted on 16th May 03 at 06:30 |
I've got a set of the alloy locking pins for my 5dr Corsa C. Last night I fitted the first one but it took ages (especially trying to re-fit the dor card). The new pins just slot on and you tighten them on by screwing in a small allen bolt but the originals seem to be screwed on. Anyone fitted these locking pins without having to remove the door cards? If so, how do you get the original pins off (I don't want to do any damage, the car's only just over a week old). It's a 1.7DTi SXi and it goes soooo well compared to my old 1.4 8v (900 miles already!). Thanks for your advice people.:thumbs: |