corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » CDR2005 Code not allowing me to enter? » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

moka

posted on 11th Apr 17 at 16:34

Was the connector behind the panel... Somehow a few of the pins had snapped. Going to get aftermarket.


moka

posted on 10th Apr 17 at 12:03

It was working absolutely fine. I've had the car in storage for 5 months or so with the battery disconnected and every month I would start the car up for 20mins or so to keep it happy and pop in the stereo code which worked fine.

Now I'm actually going to start using the car again the stereo does this (typical)...

I'm hoping it's a fuse, I will try the ones that you have suggested and report back. Thanks.

[Edited on 10-04-2017 by moka]


Ian

posted on 10th Apr 17 at 11:55

Fuse 12 or 35 for the radio

3 and 24 for the display.

I'm guessing the buttons were OK before you needed the code so you can rule out a faulty front panel?


moka

posted on 10th Apr 17 at 05:43

Video to show exactly what I mean... https://youtu.be/dK3qg-mWCGQ


moka

posted on 9th Apr 17 at 22:19

Corsa 1.2 sxi (z12xe) 2002 (02) with a VDO CDR2005


Ian

posted on 9th Apr 17 at 20:03

Need to know engine and year


moka

posted on 9th Apr 17 at 14:12

Just found this and it sounds similar... http://www.corsasport.co.uk/board/viewthread.php?tid=169743

Do you think it could be a fuse? If so which one?


moka

Icon depicting mood of post posted on 8th Apr 17 at 15:38

Currently displays SAFE, so i turn on with AS held down and get 10 ----, but pressing 1,2,3 or 4 doesnt increment the code on the display! Driving me nuts! What am i doing wrong?

[Edited on 08-04-2017 by moka]

[Edited on 08-04-2017 by moka]