|
dave49
|
posted on 17th May 15 at 14:32 |
That was my next move jus t wondered if anyone else has had the same problem?
|
chris_uk
|
posted on 17th May 15 at 14:29 |
dremmel the lip off
|
dave49
|
posted on 17th May 15 at 12:45 |
here is the link to the problem
|
dave49
|
posted on 17th May 15 at 12:39 |
here is the link to the problem
|
Ian
|
posted on 17th May 15 at 12:01 |
Yes
|
dave49
|
posted on 17th May 15 at 09:09 |
Would a picture help solve this conundrum?
|
Dee25790
|
posted on 17th May 15 at 06:26 |
Never heard of it before tbh. Quite surprised
|
dave49
|
posted on 16th May 15 at 20:40 |
no they are original, at first i thought they alloy spigots on but they seem to have a 1mm lip on the inner & outer & i cut a small section off & defo metal
|
Dee25790
|
posted on 16th May 15 at 20:32 |
Could they have been refurbished? If too much powder got in the centres they won't fit. Have a look if it's so try with a sand paper and Stanley blade to scrap away till they fit then mask off and give a quick spray of wet paint to protect them
|
dave49
|
posted on 15th May 15 at 23:20 |
Hi, recently purchased a set of corsa c active alloys to fit on my corsa c but guess what they don't fit? the centre's appear to have a lip front & back of approx 1mm.
anyone help on this one.
|