|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Tools for fitting Bonnet/Coilovers » Post Reply
|
oJNAo |
posted on 31st Jan 15 at 22:01 |
That's brilliant thanks! :thumbs: | |
corsa-torque |
posted on 31st Jan 15 at 21:19 |
Fronts - undo the bottom two hub bolts first. Leave one bolt in place. Then undo the top mount bolts once they are done jiggly the hub bolt you left in at the start out and withdraw the whole shock - refitting is reverse of removal. | |
oJNAo |
posted on 31st Jan 15 at 20:04 |
Going to have a crack at fitting the coilies tomorrow, this will be the biggest change I've done to the car myself so sorry if there's too many questions :lol: | |
corsa-torque |
posted on 26th Jan 15 at 22:35 |
The front Coilovers already have too mounts fitted so just undo the top 3 13mm nuts, the 2 17mm nut/bolts to the hub, remove old suspension. Put Coilovers in position and refit using the same bolts. Job done | |
oJNAo |
posted on 26th Jan 15 at 19:07 |
Thanks for that, am I right in that I don't need to compress the springs as the front part of the Coilovers are already put together? | |
corsa-torque |
posted on 26th Jan 15 at 18:52 |
Bonnet is 4 x13mm bolts iirc | |
oJNAo |
posted on 26th Jan 15 at 17:31 |
What spanners/sockets etc. do I need to remove and fit a corsa b bonnet, and FK Coilovers? |