|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » cheapest Wilwood brake discs » Post Reply
|
gary2097 |
posted on 25th May 14 at 20:39 |
Please delete | |
andy_mk3 |
posted on 25th May 14 at 10:10 |
Ah balls, apologies :D | |
andy_mk3 |
posted on 25th May 14 at 09:15 |
Mtec sell 288mm discs pre-drilled to 4 stud | |
gary2097 |
posted on 25th May 14 at 09:12 |
Anyone loads of people have tees someone must know | |
gary2097 |
posted on 24th May 14 at 19:19 |
any help is appreciated even if someone can tell me the cheapest place to buy the correct discs £100 a disc seems really expensive | |
gary2097 |
posted on 24th May 14 at 18:50 |
hi mate you sure they are from the mk2 gti ive found some 280mm discs from a mk2 gti but they are nowhere near the depth i need 38.7mm mine are closer to 50mm | |
corsadonk |
posted on 24th May 14 at 17:21 |
From what I worked out in the past, they use Golf disc's. From memory they are for a MK2 GTI. | |
gary2097 |
posted on 24th May 14 at 15:26 |
Forgot to say everything else in the meriva ones were spot on apart from the depth | |
gary2097 |
posted on 24th May 14 at 15:24 |
Right back to square one meriva discs aren't thick enough and won't fit from front to back the wilwood disc is about 50mm the meriva one is only 42mm there seems to be a really deep hub on the wilwoods. I've priced up the correct discs and they are nearly £200 a pair which seems ridiculous where has everyone else bought theirs from surely u didn't pay that help needed please | |
monkeytwizzel |
posted on 17th May 14 at 16:38 |
meriva dicscs will ok,just check the ofset of disc is the same. | |
gary2097 |
posted on 17th May 14 at 16:28 |
i need 4 stud though and dont want to go through the hassle of getting them redrilled i was hoping that the meriva ones would be a direct replacement | |
monkeytwizzel |
posted on 17th May 14 at 16:26 |
The vectra disc are 288mm dia and 5 stud,If the pads are tight then a quick rub on some sand paper will take a mil off. | |
gary2097 |
posted on 17th May 14 at 16:12 |
i was just aware that people use the meriva ones on v6 calipers thats all | |
monkeytwizzel |
posted on 17th May 14 at 16:10 |
If your discs are definatly 280mm dia and 24mm thick then the meriva ones will be ok,Have you measured for dics ofset also? | |
gary2097 |
posted on 17th May 14 at 15:48 |
Hi all need new brake discs on my corsa b with wilwood 4 pot midlite calipers. i need the 280mm ones i had a quote from a company on ebay motorsports tools and they want nearly £200 for a pair of discs which seems ridiculous. I will try rally design but they arent open until tuesday. |