|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » corsa 1.4 16v speedo sensor, which part.. » Post Reply
|
monkeytwizzel |
posted on 18th May 14 at 18:54 |
So it`s a proper electric speedo type box? I take that you see the pick ring in there when you checked. | |
Metzy |
posted on 18th May 14 at 08:37 |
Nope Monkey can see no teeth. Just had take diff plate off as last night the centre of the speedo drive dropped in box,looking up or down iI can't really see a corresponding toothed wheel like I was expecting, this means its the uncogged black plastic sender I need doesn't it? | |
Metzy |
posted on 17th May 14 at 19:10 |
Just tried look and can't see down there :( gonna try and video it with my phone in a min see if I can see owt | |
monkeytwizzel |
posted on 17th May 14 at 17:04 |
When you look into the speedo drive hole in the box do see any teeth on the speedo drive ring? | |
Metzy |
posted on 17th May 14 at 16:50 |
Oh an did as you suggested and all it did was flex the drive up and down rather than spin. | |
Metzy |
posted on 17th May 14 at 16:48 |
Took main sender out of both boxes, and think I have figures the problem... the one out the car has a couple of teeth damaged an the end melted a bit, then I noticed a couple of differences on the box. I think the Muppet before me has put a 1.0-1.2 box in and put the 1.4 16v sender in so he could plug it in, however I don't think they're interchangeable are they? I know Renault and pug ones certainly aren't anyway | |
monkeytwizzel |
posted on 15th May 14 at 19:13 |
They do stick into the box well,Yes the drive teeth strip off sometimes just spray it with wd40 get some grips on it and give it a wiggle. | |
Metzy |
posted on 15th May 14 at 10:35 |
Swapped clocks and no different so must be that second part of the speedo drive even though my dealer has only ever sold one in 3 years.. hmm | |
Metzy |
posted on 14th May 14 at 11:05 |
But is it the white part that breaks? And great. Well it doesn't want come out in one piece at all on either box so will have price new one up | |
monkeytwizzel |
posted on 13th May 14 at 22:22 |
If you have the screw on transducer on the box and a white plastic drive fitted in your gearbox then yes. | |
Metzy |
posted on 13th May 14 at 14:11 |
Got a 96 Corsa 1.4 16v sport, no speedo and cuts out at junctions so swapped the speedo sensor for one off my spare engine and box (which worked in donor car) now still no speedo and is cutting out |