corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » X16xe P0200 fuel injection circuit or circuits » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Alexgray

 posted on 17th May 14 at 22:00

Was x16xe before, originally x14xe but had x3 x16xe in the last 3 years


Generation

 posted on 15th May 14 at 21:51

What engine was in there before? Are you using a MPI pump?


Alexgray

 posted on 15th May 14 at 21:35

I'm just going to replace all of them and new rail just to be safe


Ian

 posted on 13th May 14 at 18:34

See if you can get a misfire code to see which cylinder is affected then swap out the injector.


Alexgray

 posted on 13th May 14 at 13:47

Yeah misfires a lot jults about as soon as the light comes on I can get hold of more injectors could it be that ? My friend plug a light thing on the plug bits that goes to the injectors that flashes and he said the electric pulse going to them is fine so could be them ?


Ian

 posted on 13th May 14 at 12:34

Do you get a misfire after the light comes on?

Will normally disable the injector in question which will give you a misfire on that cylinder.

Do you have other injectors to swap in?


Alexgray

 posted on 13th May 14 at 10:57

1999 corsa sport


Alexgray

 Icon depicting mood of post posted on 13th May 14 at 10:57

I've had 2nd x16xe engine put in my 1994 corsa sport gsi rep / i now have an issue the car drives fine if kept under 3500rpm as soon as I go over eml comes on and car bogs out and dies, I've plugged it into a fault reader and it's coming up P0200 fuel injection circuit or circuits , :/