|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » X16xe P0200 fuel injection circuit or circuits » Post Reply
|
Alexgray |
posted on 17th May 14 at 22:00 |
Was x16xe before, originally x14xe but had x3 x16xe in the last 3 years | |
Generation |
posted on 15th May 14 at 21:51 |
What engine was in there before? Are you using a MPI pump? | |
Alexgray |
posted on 15th May 14 at 21:35 |
I'm just going to replace all of them and new rail just to be safe | |
Ian |
posted on 13th May 14 at 18:34 |
See if you can get a misfire code to see which cylinder is affected then swap out the injector. | |
Alexgray |
posted on 13th May 14 at 13:47 |
Yeah misfires a lot jults about as soon as the light comes on I can get hold of more injectors could it be that ? My friend plug a light thing on the plug bits that goes to the injectors that flashes and he said the electric pulse going to them is fine so could be them ? | |
Ian |
posted on 13th May 14 at 12:34 |
Do you get a misfire after the light comes on? | |
Alexgray |
posted on 13th May 14 at 10:57 |
1999 corsa sport | |
Alexgray |
posted on 13th May 14 at 10:57 |
I've had 2nd x16xe engine put in my 1994 corsa sport gsi rep / i now have an issue the car drives fine if kept under 3500rpm as soon as I go over eml comes on and car bogs out and dies, I've plugged it into a fault reader and it's coming up P0200 fuel injection circuit or circuits , :/ |