|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » fuel rail fittings » Post Reply
|
Jed D |
posted on 21st Mar 14 at 14:58 |
i estimated it to be around 8.5litres before i had that front corner chopped and welded to allow space, should get 2 runs easy... just keep checking it | |
bigron1988 |
posted on 20th Mar 14 at 15:34 |
It's a drag car best place for them , how many liter does that take ? | |
pow |
posted on 20th Mar 14 at 15:08 |
Jesus wept have you got a death wish? | |
Jed D |
posted on 20th Mar 14 at 14:43 |
i can definitely confirm that the bigger one of the two rail fittings isnt AN8 as iv got another one from torques here... it must be specialist fitment :( | |
Jed D |
posted on 18th Mar 14 at 22:15 |
the AN6 fits the small one fine, cant see why they would do a different thread type for the bigger one? | |
bigron1988 |
posted on 18th Mar 14 at 20:14 |
that dont look like s an fitting the middle one , as said you need to take it a pipe fittings place and get them to measure it | |
davegreen |
posted on 18th Mar 14 at 19:52 |
your best bet will be to remove the fitting from the fuel rail take it into your local pirtek and get a different adaptor. think the thread is m10 x 1.5 or 1.25 pitch. | |
Jed D |
posted on 18th Mar 14 at 12:44 |
here we can see what iv got, smallest being AN6, middle one being the size i need for the rail and the biggest being AN8 according to demon motorsport... im not sure if they've sent me AN10 by mistake | |
bigron1988 |
posted on 17th Mar 14 at 19:46 |
they dont do a an-7 , have a google and find out what the thread is on the fuel rail and you might need a adaptor to take it to a an- fitting | |
Jed D |
posted on 17th Mar 14 at 16:47 |
little help with fuel rail fittings please... |