|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa b conversion hubs!! Helpp!! » Post Reply
|
davegreen |
posted on 12th Sep 13 at 05:42 |
quote: only cost me £60 to get my steering knuckles machined, much better way to do it than so called motor sport hubs. I was forever changing bearings and hubs before doing this. always used mtech hubs. do it right, do it once! :thumbs: | |
Jed D |
posted on 10th Sep 13 at 07:24 |
get the best conversion hubs here | |
LHT C20XE |
posted on 5th Sep 13 at 14:04 |
Honestly i dont care what i have on it i just want to drive my car | |
corsadonk |
posted on 5th Sep 13 at 06:44 |
It's more down to how you drive, I've had M-Tech ones shear, which are the same as the LMF ones. It's your risk. | |
andyc1234 |
posted on 4th Sep 13 at 21:03 |
Put some decent conversion hubs from somewere proper not china and so long as you press it all together proper you should be fine | |
monkeytwizzel |
posted on 4th Sep 13 at 20:21 |
moxon508 has a pair for sale! | |
gazza808 |
posted on 4th Sep 13 at 19:19 |
Most aren't machined properly, sharp corner instead of a radius etc, and super cheap Chinese crap hubs. | |
LHT C20XE |
posted on 4th Sep 13 at 18:25 |
Thats more effort then its worth | |
corsadonk |
posted on 4th Sep 13 at 18:14 |
Get your steering knuckles machined to take VW bearings, and hubs which haven't been turned down making them shear. | |
LHT C20XE |
posted on 4th Sep 13 at 17:02 |
Whats lmf, are all conversion hubs 33 spline? | |
andyc1234 |
posted on 4th Sep 13 at 15:35 |
Ebay or lmf do conversion hubs only about 20 each nowadays | |
LHT C20XE |
posted on 4th Sep 13 at 13:35 |
Im looking to replace my hubs on my c20xe corsa b as 1 is snapped and both bearings are dead, i just want to know what hubs fit? They are 33 spline, thanks |