|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » epas and sport dash loom » Post Reply
|
| AlexW |
posted on 7th Jul 13 at 09:01 |
I loled at this, the models with EPAS have a smaller, differntly layed out fusebox, with other relays around the glovebox. | |
| Jed D |
posted on 7th Jul 13 at 05:29 |
so it did fit :lol: | |
| Jonny.N |
posted on 6th Jul 13 at 20:21 |
Yes and the original fusebox is smaller. Its not got all the relays along the top left like sport one does. Doesnt matter | |
| Jed D |
posted on 6th Jul 13 at 20:14 |
hes on about the epas motor... the epas ecu sits down where a normal (sport for example) engine ecu is. | |
| Jonny.N |
posted on 6th Jul 13 at 20:13 |
And putting a sport fusebox which is alot bigger than a 1.216v one easily fits in with the epas motor still in place? There not all the same size . N the epas ecu is in drivers footwell. | |
| Aidan-Fleming |
posted on 6th Jul 13 at 19:20 |
Sorry the ECU bolts to the top of the rack behind dash | |
| Aidan-Fleming |
posted on 6th Jul 13 at 19:15 |
Oh my god, this is easy seriously! Every fuse board fits in the same place. Even if it has the Epas Ecu! The Epas Ecu sits against the right hand side of the footwell. Fit the fuse board where it's ment to go then tuck the Epas Ecu up behind it! | |
| Jed D |
posted on 6th Jul 13 at 14:15 |
but it doesnt on the others :o | |
| Jonny.N |
posted on 5th Jul 13 at 13:34 |
I know there all in the same place. Cant no one read? The epas unit behind fusebox is stopping it sittin in place | |
| Jed D |
posted on 5th Jul 13 at 13:03 |
fuse box is normally there in gls's, clubs etc... all that have epas. its in the same place in all them | |
| Jonny.N |
posted on 5th Jul 13 at 11:25 |
Has people any pics of it bein done? Am not wanna spend hours tryin to fit it n then get told it wont fit etc lol | |
| craig55 |
posted on 5th Jul 13 at 09:14 |
Will fit its just very tight | |
| Jed D |
posted on 5th Jul 13 at 08:49 |
you mean the epas motor is in the way of where the fuse box should sit? | |
| Jonny.N |
posted on 4th Jul 13 at 22:36 |
The epas ecu has nothing to do with what I want to know?. The sport fusebox doesnt fit it with a epas setup nothing to do with the ecu | |
| Aidan-Fleming |
posted on 4th Jul 13 at 22:33 |
the fuse box is the same place in every corsa whether it has the epas or not. you can always unclip the epas ecu and tuck up behind dash and tiewrap it onto somthing so it dosent fall down | |
| Jonny.N |
posted on 4th Jul 13 at 17:16 |
Ive changed the loom on my 1.2 16v auto to a x16xe dash loom. But still have epas on it problem is. My fusebox doesnt fit where its suppose togo. The epas unit sits in its way. Is there any way round it without changing the epas setup? My dash loom has the alarm box on the bk of the fusebox. So makes it bigger again. Thanks |