|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » tapping noise which increases with revs » Post Reply
|
Martin W |
posted on 31st Dec 12 at 09:57 |
quote: what oil are you using? have you just finished doing the head? 10w 40 and yeah just replaced 4 valves | |
Martin W |
posted on 31st Dec 12 at 09:56 |
quote: This sounds possible , ill have a look at the weekend cheers | |
Jed D |
posted on 31st Dec 12 at 07:56 |
what oil are you using? have you just finished doing the head? | |
davegreen |
posted on 31st Dec 12 at 07:17 |
you may have a stuck lifter or two after the bent valves? its possible that when the valves got bent the lifters where forced right in on theses valves and are now stuck. take the cam cover off and have a look to see if any lifters are lower, softer than the rest or not touching the cam as you turn engine over by hand. | |
gary2097 |
posted on 31st Dec 12 at 00:30 |
does it go off after 3k ish? if so could be belt tensioner really common thon x14xe and x16xe | |
mattievRS |
posted on 30th Dec 12 at 23:28 |
colapsed water pump? | |
Martin W |
posted on 30th Dec 12 at 22:41 |
quote: tell me about it :o | |
Martin W |
posted on 30th Dec 12 at 22:41 |
quote: will try and get one tomorrow. when we put the lifters back in we forgot to line up the oil holes on the head to the lifter so im hoping thats the reason its not getting the oil? | |
one-mr-t |
posted on 30th Dec 12 at 22:16 |
I've been reading ur project thread ect don't think your luck can get any worse! All the best with it tho and hats off to you for not giving up! | |
corsadonk |
posted on 30th Dec 12 at 21:58 |
Can you get video of it? | |
Martin W |
posted on 30th Dec 12 at 17:17 |
Possibly, but why would it randomly stick? | |
shaunmods |
posted on 30th Dec 12 at 17:12 |
Sticking lifter maybe mate? | |
Martin W |
posted on 30th Dec 12 at 16:50 |
hi guys, |