|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Fitting CD changer » Post Reply
|
Mav 3000 |
posted on 5th May 03 at 10:47 |
I take it you DO have the same make HU as the CD Changer don't you :) | |
jm960326 |
posted on 4th May 03 at 23:04 |
I had connect changer cable and live, red. Then ground the changer end in the boot. What make is it that you have got, have you got it working yet? Mine didnt work at first as when putting the sills back, my mate put a screw through the cable, doh, expensive mistake that! | |
Fear |
posted on 4th May 03 at 18:58 |
Yep all you need to connect is the data cable and in some cases thats it, i ve got an alpine and thats all i had to do on my old sony however ihad to connect the data cable and some RCAs, what make is it? | |
digitalbanana |
posted on 4th May 03 at 17:51 |
so power comes from the headunit, not off the batt.? | |
Mav 3000 |
posted on 4th May 03 at 12:18 |
I just had to plug the two rca leads into the back of the HU and attach the supplied data cable with which to control it etc. | |
Richie |
posted on 4th May 03 at 10:15 |
on my cd changer you need to plug it into the back of the headunit, and wire a yellow live into the changer. | |
king corsa |
posted on 4th May 03 at 10:09 |
When fitting a cd changer is it a matter of just plugging it into the head unit??? I just did this but nothing seems to be happening:boggle: |