|Not logged in [Login - Register]|
|You Are Not Registered Or Not Logged In|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » oil temp gauge... » Post Reply
||posted on 28th Nov 12 at 18:17|
ive got 1 to fit im just getting a second sump not drill and tap it and fir the sensor in lol wiere it up job done :) bit of thread tape to stop any potential leek - easy
||posted on 27th Nov 12 at 21:26|
Iunno, the Alfa has one already :lol:
||posted on 27th Nov 12 at 19:51|
oil temp gauge needs its sensor fitting in the sump. can be fitted in the plug with a new plug/sensor unit or a second boss welded into the sump just above the sump plug is the prefered location to messure oil tempreture.
||posted on 27th Nov 12 at 19:37|
there is a guide over on mig web forum for fitting one
||posted on 27th Nov 12 at 19:25|
This is pretty much what you need to do, there is a couple of plugs on the back of the XE you can take out and fit the pressure sender.
||posted on 27th Nov 12 at 19:14|
Yeah but it won't be so accurate there would it? :boggle:
||posted on 27th Nov 12 at 19:12|
Oil temp gauge? Can't you get the sump plugs that have a sensor built in?
||posted on 27th Nov 12 at 14:56|
Is it really? Is there a guide on where everything is?
||posted on 27th Nov 12 at 14:27|
T-piece the standard oil pressure switch and stick an electrical gauge in place.
||posted on 27th Nov 12 at 14:23|
Probably the hardest one to fit out of the usual selection of gauges tbh
||posted on 27th Nov 12 at 14:20|
I really want to get a oil temp gauge fitted on my xe, just wondered if anyone on here has done it, and if its a fairly straight forward mod..