|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa B dashboard removal/Wiring loom query » Post Reply
|
| Generation |
posted on 19th Sep 12 at 11:58 |
Welcome | |
| Johnjourno |
posted on 18th Sep 12 at 14:37 |
don't worry now, managed today | |
| Johnjourno |
posted on 17th Sep 12 at 18:41 |
anyone got a picture of this? or a link to a guide? are these the only bolts left to remove? | |
| scottyp1989 |
posted on 17th Sep 12 at 11:02 |
Under the scuttle pannel | |
| Generation |
posted on 17th Sep 12 at 09:56 |
There's mre bolts inside the engine bay | |
| Johnjourno |
posted on 17th Sep 12 at 08:49 |
Forgot to add, I removed the 2 bolts from both sides of the dashboard, the bolt behind the centre console and removed the support bar, and the 2 nuts on the drivers side next to the fusebox but it won't come out, have I missed something obvious? | |
| Johnjourno |
posted on 17th Sep 12 at 08:13 |
Hi everyone, I was at the breakers yesterday getting a car loom so I can fit electric windows etc, got the loom upto the multiplug at the front, do I need the dashboard loom to run it? The loom I have sourced has the CDL controller on it, and all the wiring to the doors, and I got the door looms, but do I need the dash loom, as none of my wiring went to the fuse box, or is the dash loom the same? To my next question, is the fusebox/relay board different on the EPS cars to the non EPS? if so, I presume I need the dash loom, I am guessing I don't need the headlamp loom as it won't be any different than mine, and hopefully it doesn't require me removing the engine loom? |