|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Car staying on! Urgent help please :) » Post Reply
|
Aidan-Fleming |
posted on 1st Sep 12 at 16:34 |
when i put the switch in should it be turned closest to me? then turn the barrel closest to me? or should i start the key and the switch at second position? As im turning the key closetst to me and have the switch turned closest to me also. dunno if i should start them both at position two or three? | |
Aidan-Fleming |
posted on 1st Sep 12 at 15:06 |
Holy shit man, the switch inside can be moved yes! An the ignition barrel can be moved, so you line the pin and the hole in the switch up and put the switch against the back I the barrel! Then put the little screw in! That's what I've done!! | |
Generation |
posted on 1st Sep 12 at 13:54 |
It doesn't only go one way FFS. It can be moved. | |
Jas |
posted on 1st Sep 12 at 13:17 |
:lol: I'd love to have been a fly on the wall... | |
Aidan-Fleming |
posted on 1st Sep 12 at 10:50 |
Yeah it was indeed and I know where your all coming from, but the switch only goes on one way! With the little nib bitty going into the switch. I've had the dash out so I'm not sure if there's a constant live or somthing? :/ | |
tom_simes |
posted on 1st Sep 12 at 10:35 |
The car was fine before you changed the ignition switch. Therefore I think it's pretty fair to assume that the switch is the bit that has messed it up. | |
Aidan-Fleming |
posted on 1st Sep 12 at 10:18 |
quote: bloody hell! The igniton switch can only go in the position that the barrel is in!!! the nib bitty at the other side of the barrel is shaped the same as the inside of the switch, so it only goes in one bloody way!!! | |
Aidan-Fleming |
posted on 1st Sep 12 at 10:13 |
quote: Yeah i know you can mate, but its the ignition barrel side that determins where to set the switch, as when the keys are out the barrel is in position 1. so you turn the switch to suit so that the little bit goes inside the switch! Ive done that. must be something else | |
GB123 |
posted on 1st Sep 12 at 09:41 |
Does sound like the barrel isn't lined up with the right place on the switch, hence why the car is still running while the barrel is in the off position | |
Generation |
posted on 1st Sep 12 at 09:01 |
I know how the switch works I've changed them twice. You're not thinking about this logically. | |
Aidan-Fleming |
posted on 1st Sep 12 at 00:32 |
Yes Ive done that!! The switch can't be in the wrong position!! It only goes on one way! When you hve the ignition switch off you can see the other side of the ignition barrel, which is like a little pin!! The end of the ignition switch has a hole and that little bit goes into it, but can only go in a sertain way!! It's not that guys! | |
nibnob21 |
posted on 1st Sep 12 at 00:07 |
quote: http://www.corsasport.co.uk/board/viewthread.php?tid=642026 | |
Aidan-Fleming |
posted on 31st Aug 12 at 21:31 |
quote: What you mean? :/ | |
Generation |
posted on 31st Aug 12 at 21:16 |
You need to fix the other issue as I said | |
Aidan-Fleming |
posted on 31st Aug 12 at 20:52 |
Mmm do you know anywhere that there would be a switched live? I dunno much about electrics lol | |
reecegsi |
posted on 31st Aug 12 at 20:44 |
you have power running to a switched live | |
Aidan-Fleming |
posted on 31st Aug 12 at 15:16 |
Just went to start my car and it started :) But.... I decided to turn it off and take the keys out but the car was still running :! So took the igniton switch out but it was still running then disconected the battery and it was still running :! Then i took out the HT leads and it cut out. |