|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Painting washer jets » Post Reply
|
S21NMP |
posted on 28th Apr 03 at 11:55 |
:lol::lol::lol::thumbs: | |
cobra148 |
posted on 28th Apr 03 at 09:31 |
ZIPPY :lol: | |
S21NMP |
posted on 28th Apr 03 at 08:14 |
Probably, Metallics usually need a lacquer. | |
moddedcorsa |
posted on 27th Apr 03 at 19:57 |
look good!! If i was to do mine in star silver, id need plastic primer, star silver paint and would i need lacquer?? | |
S21NMP |
posted on 27th Apr 03 at 15:10 |
| |
S21NMP |
posted on 27th Apr 03 at 14:48 |
The HAlfords ones don't fit, and they look shit anyway!! I have done it now, popped out and got some spray paint, rubbed them down with a bit of sand paper, cleaned them off with white spirit, primed them with touch up primer and then gave them 3 coats of Flame Red ;-) Look mint - I'll get some pics if anyones interested... | |
antonOO2 |
posted on 27th Apr 03 at 11:32 |
dumb ass body shop glued my fuckrs on ,im still Pi$$ed about it.had a right go at them | |
1.0to2.0 |
posted on 27th Apr 03 at 10:38 |
Just looked they r only £3.99, for ripspeed ones in either red, blue, siler or titanium. | |
1.0to2.0 |
posted on 27th Apr 03 at 10:34 |
buy some from halford, they r cheap, saves fcuking about!!! | |
S21NMP |
posted on 27th Apr 03 at 10:13 |
I thought someone had done it with a touch up stick? Or will this look crap? | |
moddedcorsa |
posted on 26th Apr 03 at 21:37 |
will ordinary primer do? or does it hav 2 b plastic primer? | |
slate58 |
posted on 26th Apr 03 at 21:23 |
Ive doen mine, its easy enuff, open the bonnet and pop them out from underneath (they have little catches to keep em in so a little screwdriver is handy). Disconnect from pipe (tape this to outside of bonnet so it doesnt pull back inside), clean em up and degrease, pop some blu tac into the hole where the actual jets are (youll see what i mean when u have em out) so they wont get clogged with paint. Prime and spray then fit em back in (remove blu tac of course), simple. | |
moddedcorsa |
posted on 26th Apr 03 at 21:11 |
yeah id like to do this as mine are grey, look crap | |
RickV6 |
posted on 26th Apr 03 at 20:15 |
WHY! | |
S21NMP |
posted on 26th Apr 03 at 19:48 |
A few weeks back, I saw a post on painting your washer jets but now I can't find it! |