|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Heater fan problem - only working on speeds 3&4 » Post Reply
|
corsaSABIIR |
posted on 29th Oct 13 at 10:28 |
hi guys im new to this forum and ive been looking through the comments about the fans only working on 4th speed. how can i be sure that the heater blower hasn't packed in instead of the motor/ fan resistor? please help, would be appreciated . by the way i have a 2007 Corsa D sxi 1.2 | |
Phoenix Autosport |
posted on 19th Feb 12 at 19:36 |
ive not got any resistors but if it turns out to be the switch at fault let me know as i have a few spare ones at the workshop i can let you have for next to nothing | |
spankyjames |
posted on 18th Feb 12 at 18:26 |
Yeah that's it's you have to take all the plastic off on the left of it to get to it | |
Ian |
posted on 18th Feb 12 at 17:48 |
| |
spankyjames |
posted on 18th Feb 12 at 17:48 |
Had this on my Corsa changed the resistor and worked perfectly to get to it take pollen filter out and you will see it on the right you can also get it from the passenger footwell to unplug the wires | |
ada_corsa |
posted on 18th Feb 12 at 17:45 |
my sport only works on speed 4 | |
Dan H |
posted on 18th Feb 12 at 01:42 |
will be heater resistor, mate has a corsa vxr and keeps going off, i give the resistor a swift tap/kick and starts working fine, couldnt tell ya where they are on a corsa b! never had to change one... they are about £10 off ebay | |
scottyp1989 |
posted on 16th Feb 12 at 23:35 |
A bodg recomended by ford because they cant be botherd to actually fix it. If you are any good soldering etc you can change the resistors. | |
johnhara1 |
posted on 16th Feb 12 at 22:25 |
I said TOO hot, not hot. | |
scottyp1989 |
posted on 16th Feb 12 at 21:19 |
The whole point of the resistor pack is to get hot. | |
johnhara1 |
posted on 16th Feb 12 at 20:51 |
what car? | |
Paul W |
posted on 16th Feb 12 at 19:27 |
That's the thing dude, i've not had anything off recently, it just seems to have stopped working, which is why i'm thinking it could be the resistor pack corroding or something. I'll have to have a dig around tomorrow and see what i can find unless someone can point me in the right direction. | |
Ian |
posted on 16th Feb 12 at 18:24 |
Happens a lot on Pumas, never heard of it on Corsas, I'll have a spare one if you can locate it. | |
FAZ |
posted on 16th Feb 12 at 18:24 |
did you connect everything back up in its correct sequence after?, i.e. did the swivel switch go back in the right way? | |
Paul W |
posted on 16th Feb 12 at 18:20 |
Heater fan doesn't work on speeds 1&2 but does work on 3&4, only just recently started doing it. I've read that it could be the resistor pack? Am i right in thinking replacing this would solve it? Also, is it located in or around the pollen filter, cheers peeps |