|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Wheel nut/bolt size please » Post Reply
|
alan-g-w |
posted on 28th Sep 11 at 17:34 |
If the offset on them means that there isn't enough of the thread sticking out with the wheels on all you'd need to do it look into getting new studs assuming they just need double nutted to be replaced. | |
sc0ott |
posted on 28th Sep 11 at 17:09 |
Really? | |
Gary |
posted on 28th Sep 11 at 16:28 |
m12 x1.5 is standard wheel nut. 22 quid seems a bit steep | |
sc0ott |
posted on 28th Sep 11 at 14:32 |
Just remembered that lol. | |
Corsa_Sport21 |
posted on 28th Sep 11 at 14:24 |
http://www.ebay.co.uk/sch/i.html?_nkw=civic+type+r+wheel+nuts&_sacat=0&_dmpt=UK_CarsParts_Vehicles_CarParts_SM&_odkw=ep3+lug+nuts&_osacat=0&_trksid=p3286.c0.m270.l1313 | |
Corsa_Sport21 |
posted on 28th Sep 11 at 14:19 |
Ask on a Honda forum, they will know straight away what nuts you need. | |
sc0ott |
posted on 28th Sep 11 at 13:35 |
Diameter of the threaded part i mean. | |
sc0ott |
posted on 28th Sep 11 at 13:34 |
Ffs silly iphone. | |
Gary |
posted on 28th Sep 11 at 13:16 |
longer and skin? | |
sc0ott |
posted on 28th Sep 11 at 13:14 |
Wanting to buy coloured lug nuts. | |
Gary |
posted on 28th Sep 11 at 13:03 |
Just goto your local motor factors and buy some longer wheel bolts, thats what i had to do to put merc wheels on my passat | |
sc0ott |
posted on 28th Sep 11 at 13:01 |
Problem is the car i have has them on but they have locking nuts but i dont have the key. Was considering getting them taken off and a new nut set put on them all. | |
Eddx14xe |
posted on 28th Sep 11 at 12:56 |
You need to put the nut through the wheel and see how many threads come out the other side/will go into the car. Should be around 5 threads. | |
sc0ott |
posted on 28th Sep 11 at 12:30 |
Am i right in saying the required nut size for the 17 x 7.5, 5 x 114.3 size will be the same for all offsets? |