|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Nova 2.0 16v Vs Corsa 2.0 16v! » Post Reply
|
Daimo B |
posted on 14th Apr 03 at 13:45 |
Nope, the earlier Coscast engines that never had a CAT produced 156bhp where-as the ones vauxhall prduced and bought back from Cosworth without a cat had 156bhp :) | |
BeArDy |
posted on 14th Apr 03 at 11:01 |
ye astra(156) and cav(150) | |
stuyw |
posted on 13th Apr 03 at 10:18 |
there was two variants of the c20xe, 150bhp and 156bhp | |
Nailz |
posted on 13th Apr 03 at 09:57 |
156bhp i think | |
J da Silva |
posted on 13th Apr 03 at 09:54 |
wud that be roughly about 150bhp? | |
stuyw |
posted on 13th Apr 03 at 09:48 |
Induction kit | |
J da Silva |
posted on 13th Apr 03 at 09:42 |
so it will suit the gte then? what would i get with the kit? | |
stuyw |
posted on 13th Apr 03 at 09:41 |
ur better off getting the c20xe kit as u will have everything. If u get the c20let kit, then its dearer and u get bits that u will not need. | |
J da Silva |
posted on 13th Apr 03 at 09:31 |
the price has gone up on the kit aint it,can u use the c20let (204bhp) kit with a gte astra 2litre astra engine? | |
stuyw |
posted on 13th Apr 03 at 09:25 |
with the anti-roll bar, u need to get the kit from PVD. Wot this does is lower the anti roll bar so that it clears the manifold :) | |
J da Silva |
posted on 13th Apr 03 at 09:16 |
kerry u really got a station waggon? lol | |
Kerry |
posted on 13th Apr 03 at 08:58 |
2lt into a corsa is alot easyer then the nova as the engine bay is alot bigger so where on the nova u have to cut the inner wing for the pullys.... | |
J da Silva |
posted on 13th Apr 03 at 08:25 |
obviously u'll know about brake upgrades with u havin a 2litre gte , but what has to be done to anti roll bars? | |
stuyw |
posted on 13th Apr 03 at 06:41 |
its straight forward m8 n the easiest bit is that u dont need to strengthen the engine bay :) | |
Cybermonkey |
posted on 13th Apr 03 at 06:11 |
the setup will be very similar to your Nova mate. Dimensions wise, the engine bay is a little bigger on the corsa and with the correct fitting kit, including mounts etc, you will find it easy enough. Can be done in a weekend if you put your head to it :) | |
supacorsa |
posted on 12th Apr 03 at 15:00 |
i think theres less work involved as you dont have to strengtan anything but i am no expert. | |
tarmac_terrorist |
posted on 12th Apr 03 at 14:45 |
After installing a 2.0 16v engine into a Nova GTE i'm fancying a change, and a move away from that boyracer image. |