Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » stripping down x16xe wiring (track car) » Post Reply

Who Can Post?

All users can post new topics and all users can reply.

Icon:

Formatting Mode:
Normal
Advanced
Help

Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On

Post Options:

Disable smileys?
Turn BBCode off?
Receive email notification of new replies?


AlexW	posted on 26th Jun 11 at 15:19
	Yes.
calibra-keith	posted on 26th Jun 11 at 13:34
	quote: Originally posted by AW06 On X14 and X16 the relay is on the engine loom, right next to the ECU. Yes that relay is also purple, But its just a colour that vauxhall use for that type of relay. On like 12v, 1.2 models the fuel pump relay is next to the glovebox yes. so the relay/wires in picture one and two can all go ?
AlexW	posted on 26th Jun 11 at 13:06
	On X14 and X16 the relay is on the engine loom, right next to the ECU. Yes that relay is also purple, But its just a colour that vauxhall use for that type of relay. On like 12v, 1.2 models the fuel pump relay is next to the glovebox yes.
ryanlockie	posted on 26th Jun 11 at 10:16
	When I depressurized the fuel system I took that purple relay out.
fazza	posted on 26th Jun 11 at 09:50
	I replaced the fuel pump relay on my old x16xe gsi and that was purple?
AlexW	posted on 26th Jun 11 at 08:39
	Purple relay is not fuel pump relay, its part of the aircon, same with those in the 2nd pic. Its all interlinked with the rad fan, I found the best way was to just keep some of the thick fan wiring (right from the fuse) and then use a early nova rad temp switch with spade terminals and just earth the other side of it via the fan and factory wiring. If you understand that, If you dont, its cos im shit at explaining stuff. The grey relay next to the purple one is for the heater blower, if you are removing the blower, relay can go too. Most of the wiring on the back of the clocks needs to be keept, the only things to really remove is the airbag light wiring. I've stripped 3 corsa looms for track cars now so know it all off the top of my head.
fazza	posted on 26th Jun 11 at 08:18
	3rd from bottom measure air temp outside for the centre consol display in a corsa. 4th from bottom looks like either fan connector for rad or for the horn/alarm siren And the purple relay in the top pic is fuel relay. Unsure what the others are tho
scaron5188	posted on 25th Jun 11 at 22:58
	Pretty sure the purple relay is for fuel and I can't remember what the grey ones for. Apart from That I can't really help mate lol. Good luck :thumbs:
calibra-keith	posted on 25th Jun 11 at 20:12
	Hi, new to forum, i have just fitted an x16xe into my nova track car project and i am stripping the wiring down (i am using corsa loom/wiring, corsa radiator, corsa dash/speedo, basically i just need enough for engine to run, radiator and fan, speedo, rev counter and temp window wiper fuel pump no air-con/PAS pump lights/indicators (just about stripped these out) switches and any other bits at moment i will keep it simple what are these for and can i get rid also what wires must i not cut from plug that goes in back of dials for revs, speedo and temp (i know come are for lights/indicators)