|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x16xe timing marks » Post Reply
|
fattaff |
posted on 2nd Jul 11 at 01:37 |
my m8 has done bodge,by tapping right shape piece of soft wood to jam them up,he was quite pleased with himself,im not sure if i would do the same !!! | |
danbo |
posted on 25th Jun 11 at 21:30 |
the head isn't on so no driving lol think i've got it tdc now, will have to make sure is the same when the belt is back on, i may look at getting one of those locking tools for the cam sprockets though or make one some how | |
fattaff |
posted on 25th Jun 11 at 15:06 |
bottom pulley timing mark is recessed triangle on pulley,u will need to remove torx bolt(t 10 i think) and they can be tight!!( if u dont have buzz gun,be cheeky go to local tyre centre with socket and ask them to slacken bolt and nip it back up for short drive home with ratchet/bar etc,much easier to then remove,@ home),to remove poly belt pulley,then u will see marker-some time up to notch in sump and others to mark in plastic caseing,u will need to check-just done 2 engine strips recently and both were to plastic case,even tho my plastic case was destroyed and i had to buy new casing from dealer @ £25,top pulleys time to together(ie opposite) buy cheap lockup tool on ebay makes job easier | |
danbo |
posted on 25th Jun 11 at 12:27 |
assuming tdc is at very top middle of the 10degree dwell period, | |
danbo |
posted on 25th Jun 11 at 12:17 |
hi trying to find timing marks on bottom pulley as says in haynes but have no mark like in the picture, there are some holes drilled in the side of the pulley though which is different to other pulleys i've noticed no holes in them. |