corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » fuel pump not priming? » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

chrimbo88

posted on 9th Jun 11 at 19:57

Ive just done the same convertion the lad had to bypass the Fuel relay


JaffaTB

posted on 9th Jun 11 at 18:48

they are in different positions, some are behind the glovebox, some are in the footwell some are next to the ECU, if its purple then its the FPR, i have some for sale if it turns out to be that :)

[Edited on 09-06-2011 by JaffaTB]


Bissmire

posted on 9th Jun 11 at 14:02

Maybe different becuase I have a different engine but worth a check as I had the same issue.


ripley

posted on 9th Jun 11 at 12:14

hi, i thought there was only one relay for fuel in the drivers foot well?? so is this one in that fuse box next to where the loom goes in the car?


Bissmire

posted on 9th Jun 11 at 10:27

Relay, purple one under the bonnet on the left hand side next to the scuttle. worth trying that, theyre only cheap.


ripley

posted on 8th Jun 11 at 21:00

hi, i had the ecu/key chip/transponder also the eml light was not flashing...


Brett

posted on 8th Jun 11 at 20:47

immobiliser?


ripley

posted on 8th Jun 11 at 20:35

Hi all, just done a conversion on a v reg corsa b sport..from a 1.4 16v to a 1.6 16v, all went fine with the swap engine in loom in and wired up but on start up the fuel pump did not prim or come on when cranking?? checked all the loom plugs and all fine also checked the earths all fine changed the crank sensor still no joy..anyone got anymore ideas? the car is running because i took a wire from a sw/live to the pump wire. thanks