![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Not logged in [Login - Register] |
![]() |
You Are Not Registered Or Not Logged In |
![]() | ![]() |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » how do u wire up 2 amps???? » Post Reply
|
t44rnt |
posted on 4th Apr 03 at 14:53 |
would it say it on the amp? | |
t44rnt |
posted on 4th Apr 03 at 14:52 |
nope, 2 r red and 2 r white, and all i know is that they all go from the head unit to the amp | |
C2RL R |
posted on 4th Apr 03 at 14:49 |
is one set of pre outs labelled up as sub woofer? | |
t44rnt |
posted on 4th Apr 03 at 14:38 |
right, i now know now how 2 power both of the amps, the only bit im still confussed on is, 1. how to link the amps up together, and 2. what to do with the pre outs, cos 1 of the amps is a 4 channel and the other a 2 channel. | |
t44rnt |
posted on 4th Apr 03 at 07:13 |
*pre | |
t44rnt |
posted on 4th Apr 03 at 07:12 |
so i've got 2 per outs then. | |
shrews corsa |
posted on 3rd Apr 03 at 22:42 |
t44rnt yes its the red and white phono cables and if you have 4 in total that counts as 2 sets (1 red and 1 white is 1 set) | |
t44rnt |
posted on 3rd Apr 03 at 07:26 |
to tell u the honest truth im not 100% sure what a pre-out is. im not the clued up about stereo stuff, i only know some basic stuff. im guessing the a pre out is the wires that connect my head unit to my amp, if this is right, then i have 4 cables connecting them, 2 red and 2 white. | |
t44rnt |
posted on 3rd Apr 03 at 07:24 |
ita a kenwood krc 679r | |
DJ_Voodoo |
posted on 2nd Apr 03 at 23:17 |
how have you used for pre oouts if you're only using one amp to run a sub? surely you'd be using two preouts max for this? | |
C2RL R |
posted on 2nd Apr 03 at 21:56 |
wot head unit is it? make, model?? | |
t44rnt |
posted on 2nd Apr 03 at 07:29 |
would it just be alot easier to take it some where and get a shop to fit it all for me? | |
t44rnt |
posted on 2nd Apr 03 at 07:26 |
thanks for the help. i sort of understand (i think), i think i have 4 pre-out on my head unit. but my current amp is using all of them. | |
shrews corsa |
posted on 1st Apr 03 at 23:57 |
why thank you mr voodoo :lol: | |
DJ_Voodoo |
posted on 1st Apr 03 at 20:08 |
culdnt have put it better me self ;) | |
shrews corsa |
posted on 1st Apr 03 at 20:06 |
to have to amps running you need a power distribution block, audio splitters (depending how many pre outs your headunit has) then take the power lead into the distribution block and take 2 out other side of the block (1 to each amp) ground the amps attach to remote lead to the one amp and you can just take a lead from 1 amp to other to tell 2nd amp to turn on, connect all speakers then if you have 2 pre outs on your headunit take 1 set of RCA's to each amp but if you have a 4 channel amp you will need some audio splitters to connect all channels up then turn stereo on and get the gains set to how you like :thumbs: | |
C2RL R |
posted on 1st Apr 03 at 16:31 |
do u have separate pre-outs on your head unit for your sub and rear speakers? | |
t44rnt |
![]() |
i currently have one amp running my sub, but i want to use it to run some 6x9's. i have got a new amp already and i have no ide ahow to link it up 2 the other amp or head unit????? how do i get this amp to run? i only wanna use it to power my sub! |