|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Brake conversion peeps... » Post Reply
|
Andy_S |
posted on 1st Apr 03 at 08:10 |
Well I just recieved my invoice, and it says I should of had some Greenstuff Pads! And I still cant get bleedin threw to him! | |
Colin.S |
posted on 31st Mar 03 at 23:11 |
Who did you buy them from?? | |
Andy_S |
posted on 31st Mar 03 at 22:50 |
lol, chill im not having a go at anyone. ;) | |
RickV6 |
posted on 31st Mar 03 at 20:32 |
Hey dont have a go at me he was the one sayin 'if ya need instructions ya souldn't be messin......' note wrong wiv some instuctions or the good ol Haynes Bible, bet dja doesnt know all the torque settings for nuts n bolts on his car! | |
Andy_S |
posted on 31st Mar 03 at 20:21 |
everyone has to learn sometime mate. You may be able to do it blindfolded, but once you had to look at the instruction manual! | |
RickV6 |
posted on 31st Mar 03 at 20:13 |
I dont need em I could do it with me eyes closed but some peeps may need a little guidance | |
dja |
posted on 31st Mar 03 at 20:11 |
If you need instructions you shouldnt be messing with something as life saving as brakes!! | |
RickV6 |
posted on 31st Mar 03 at 20:05 |
Just testin | |
ainsley_brader |
posted on 31st Mar 03 at 20:02 |
quote: :boggle: obviously it has one where the hub goes and one for the grub screw which holds it on :rolleyes: | |
RickV6 |
posted on 31st Mar 03 at 20:00 |
10 on each! | |
ainsley_brader |
posted on 31st Mar 03 at 19:55 |
quote: 8, two pairs | |
RickV6 |
posted on 31st Mar 03 at 19:50 |
for that money I'd want some kind of instructions and some fookin pads! Them Discs look well butchered how many holes! | |
luca2020 |
posted on 31st Mar 03 at 19:14 |
yer the orange things are the calipar brackets cos the calipars are bigger than normal so need a different bracket to fit propley | |
morty |
posted on 31st Mar 03 at 19:09 |
with most uprated brakes i.e. hi-spec, wilwood and alcon plus ap racing they dont come with pads cos they dont know what your going to use them for, you should specify them with the kit but if you dont then they dont send them...also the orange things are the brackets. | |
d0gz_bollox |
posted on 31st Mar 03 at 18:10 |
Ive just got some hs-spec 4 pots. 285mm disc under 15" alloys. fills them niiiice | |
Andy_S |
posted on 31st Mar 03 at 17:37 |
cheers mate ;) | |
Kieran McMutrie |
posted on 31st Mar 03 at 17:09 |
Those are Hi Spec 4 pots are they not? Yeah you should get Braided hoses with them but depends what kit you bought and from who! The pads should slot in and be secured with a pin I would have thought. | |
Andy_S |
posted on 31st Mar 03 at 16:34 |
in that picture, that is all ive got. shouldnt I have some hoses too? | |
Andy_S |
posted on 31st Mar 03 at 16:31 |
cheers mate | |
Daimo B |
posted on 31st Mar 03 at 13:29 |
Take old brakes off. | |
Andy_S |
posted on 31st Mar 03 at 09:45 |
cost me 495. yes uprated kit. Any help peeps? | |
DJP |
posted on 31st Mar 03 at 09:40 |
how much did the kit cost? and is it an uprated kit i.e. the discs and calipers are bigger? | |
Andy_S |
posted on 31st Mar 03 at 08:04 |
My brake conversion has just arrived, but Ive recieved no pads, or instructions. Im not sure how to fit them and dont know what the orange things are for! If anyone can give me some help, it would be very appreciated! Andy |