Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x18xe1 wiring (PICTURES INSIDE) » Post Reply

Who Can Post?

All users can post new topics and all users can reply.

Icon:

Formatting Mode:
Normal
Advanced
Help

Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On

[quote][i]Originally posted by Hodgy[/i]
have a problem need to know where these what the wires are for for a x18xe i have read daveylc's 
thread about corsa loom to x18xe1:

Corsa Loom -> X18XE1 loom
1 Red/Blue -> Red/Blue (fuel pump relay output)
2 Blue -> Blue (Temp)
3 Thick Black -> Thick Black, ECU Power feed (IGN 12v)
4 Thick Red -> Fuel pump relay feed (12v)
5 Brown/White -> Brown/White(Immo)
6 Brown / Blue -> Brown / Blue (Immo)
7 Blue/Red -> Brown / White (Immo)
8 Green -> Green (Revs)
9 Brown / Yellow -> Brown / Yellow (Diag)

*Note both pin 5 and 7 goes to the brown/white wire on the 1.8 loom!

i have got a picture here to show as there is 2 blue/red wires 1 being thick other being thin

also 3 thick black wires

[IMG]http://i38.photobucket.com/albums/e120/stephenhodgson1989/corsa%20build/corsa1.jpg[/IMG]

[IMG]http://i38.photobucket.com/albums/e120/stephenhodgson1989/corsa%20build/corsa.jpg[/IMG]

starting from top :

wires we have:

BROWN/WHITE
BROWN/BLUE
BROWN/YELLOW
BLACK/BROWN
BLACK(2MM)
BLACK(3MM)
BLUE
YELLOW/RED
BLACK/BLUE
BLACK/RED
BROWN/PURPLE
RED/BLUE
BLACK/WHITE
BLACK(2MM)
RED/BLUE
GREEN
BLACK/RED

WHAT ARE THESE WIRES FOR I KNOW SOME BUT GETTING MIXED UP WITH 3 BLACK WIRES AND THICK RED AND BLUE AND THIN RED AND BLUE

MANY THANKS

ALSO WHAT IS THE GREY PLUG IN THE FIRST PICTURE FOR ????? [/quote]

Post Options:

Disable smileys?
Turn BBCode off?
Receive email notification of new replies?


Hodgy	posted on 2nd Nov 10 at 15:17
	thank you :)
DaveyLC	posted on 2nd Nov 10 at 14:55
	Also the grey plug is the power feed to the Injectors and the oil pressure/level sensors. It really is quite a simple setup.
DaveyLC	posted on 2nd Nov 10 at 14:54
	No Disrespect Hodgy but can you keep the questions to the forum and top U-2-U'ing me.. If you have a basic understanding of electronics then ALL of the information you need is in my thread.. Sadly I can't give everyone a free of charge step by step walk through.
Hodgy	posted on 2nd Nov 10 at 12:40
	have a problem need to know where these what the wires are for for a x18xe i have read daveylc's thread about corsa loom to x18xe1: Corsa Loom -> X18XE1 loom 1 Red/Blue -> Red/Blue (fuel pump relay output) 2 Blue -> Blue (Temp) 3 Thick Black -> Thick Black, ECU Power feed (IGN 12v) 4 Thick Red -> Fuel pump relay feed (12v) 5 Brown/White -> Brown/White(Immo) 6 Brown / Blue -> Brown / Blue (Immo) 7 Blue/Red -> Brown / White (Immo) 8 Green -> Green (Revs) 9 Brown / Yellow -> Brown / Yellow (Diag) *Note both pin 5 and 7 goes to the brown/white wire on the 1.8 loom! i have got a picture here to show as there is 2 blue/red wires 1 being thick other being thin also 3 thick black wires starting from top : wires we have: BROWN/WHITE BROWN/BLUE BROWN/YELLOW BLACK/BROWN BLACK(2MM) BLACK(3MM) BLUE YELLOW/RED BLACK/BLUE BLACK/RED BROWN/PURPLE RED/BLUE BLACK/WHITE BLACK(2MM) RED/BLUE GREEN BLACK/RED WHAT ARE THESE WIRES FOR I KNOW SOME BUT GETTING MIXED UP WITH 3 BLACK WIRES AND THICK RED AND BLUE AND THIN RED AND BLUE MANY THANKS ALSO WHAT IS THE GREY PLUG IN THE FIRST PICTURE FOR ?????