|
Col004
|
posted on 2nd Nov 10 at 22:01 |
One diff is that the 1.0 only has one diagnose wire. Just earth this wire when you need to code read if you have an issue
[Edited on 02-11-2010 by Col004]
|
Col004
|
posted on 2nd Nov 10 at 21:55 |
Alright mate.. Mine was a 1.0. you have to drag wires back into the car to were the xe ecu is. Mine is a LET but they are the same wiring wise.
match the wires to the pic below.
Also you have to bypass the 1.0 fuel pump relay behind the glovebox in order for the xe fuel pump to run the pump.
If you get stuck pal just gis a u2u
:thumbs:
|
john_redtop
|
posted on 1st Nov 10 at 19:53 |
you can get a fitting guide of ebay for 99p but if you put a pic of the wires up i'll see if i can help mate
|
VXandy
|
posted on 1st Nov 10 at 10:58 |
Hi everyone, im in the process of fitting the engine into my corsa, but its originally a 1.0 and im left with an ecu plug in the engine bay along with a few other smaller plugs, does anybody have a wiring diagram of how to fit it to the 1.0 at all? Or know of the way round this?
thanks :thumbs:
|