|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Calling 2ltr Owners! » Post Reply
|
and-m |
posted on 27th Mar 03 at 02:32 |
quote: Looks like the coil or something. You have a u2u fearless. [Edited on 27-03-2003 by and-m] | |
niven |
posted on 26th Mar 03 at 23:14 |
whats with the red bull can | |
fearless |
posted on 26th Mar 03 at 22:17 |
No - done a few conversions using this pipe - no problems - just have to fabricate a mounting plate with the same diameter pipe as the ecotec pipe welded to a flat plate the same size as the top of the throttle body - sealed to the throttle bode by a gasket!!!! | |
ainsley_brader |
posted on 26th Mar 03 at 22:12 |
and fitting it that way requires no modification to the bulkhead area? | |
fearless |
posted on 26th Mar 03 at 21:48 |
pipe in question is from vectra 2ltr 16v (x20xev) from throttle body to air flow meter | |
BeArDy |
posted on 26th Mar 03 at 21:12 |
not a sfi box u buy a pipe and have a plate made, mine was a rush job but dident pay for it, so have a look. the 150 for a powercap or 12 for the pipe i know what i would rather pay....... | |
stuyw |
posted on 26th Mar 03 at 21:05 |
i reckon the SFI box will look crap. n wot happens if the sheet metal worker makes a fukc up? u got any pics of the sfi box in a corsa coz i thought it dont fit coz u have to modify the engine bay for the powercap to fit, and thats smaller than the SFI box :boggle: | |
BeArDy |
posted on 26th Mar 03 at 20:56 |
not saying the good u get are not good, as i have used the *** kit and ths good are very good, just think people need to talk and look into things before, jumping into buying the kit......... | |
BeArDy |
posted on 26th Mar 03 at 20:54 |
shafts from ****** 230 no need for hubs or new wheels bareings (save load of work and at least 80 on 2 wheel B) | |
BeArDy |
posted on 26th Mar 03 at 20:47 |
ye the kits are find and good quality | |
stuyw |
posted on 26th Mar 03 at 20:09 |
its been ok with mine so far :) | |
BeArDy |
posted on 26th Mar 03 at 20:05 |
u2u me m8, can save u loads of dollors, as no offence to PVD the fitting kit is over priced and not as good as everone thinks | |
Icy |
posted on 26th Mar 03 at 10:56 |
sinkyboy fitted his himself | |
lee mitchell |
posted on 26th Mar 03 at 07:11 |
probably the same rad. you probably have the header tank with two pipes going in the top if its a sport. get the pvd kit as good quality ;) | |
Rhinos_racers |
posted on 25th Mar 03 at 18:01 |
Adam, i had a 14 sport, is the rad any bigger on the GSi?? | |
and-m |
posted on 25th Mar 03 at 17:32 |
the powercap comes with the fitting kit doesnt it? | |
stuyw |
posted on 25th Mar 03 at 17:19 |
u wanna get an exhaust tube which is at least 2 1/2" wide | |
Rhinos_racers |
posted on 25th Mar 03 at 16:58 |
Im toying with the idea of a 2ltr in ma beast since the piston let go on me. |