|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » removing gear knob » Post Reply
|
shaunmods |
posted on 2nd Jul 10 at 21:34 |
I cut mine off in the end :o | |
arizona ste |
posted on 2nd Jul 10 at 17:03 |
waterpump pliers took mine off when it was stuck | |
Daveskater |
posted on 2nd Jul 10 at 12:23 |
I recommend Castol Elbow Grease btw, it makes everything that much easier :cool: It works better than these budget brands you get too. | |
DaveyLC |
posted on 2nd Jul 10 at 08:09 |
Go to your local motor factors and ask for a jar of Elbow Grease.. Smear some on and give it another go. | |
Jamxe |
posted on 1st Jul 10 at 22:50 |
Yep you just need to pull and twist it.. I thought mine would never shift, then my brother pulled it off and I was like "oh"... | |
SnK |
posted on 1st Jul 10 at 17:18 |
Have really dry grippy hands and give it a good tug whilst rotating it. Mine comes up easy haha. If not get a plank of wood and put it against the seat whilst you pull up at one end. like this... / | |
karisma_corsa |
posted on 1st Jul 10 at 14:39 |
trying to remove the gear knob from my p reg corsa gls, has the standard ball style knob with the plastic disc showing the gear pattern. tried pulling it off but it doesnt seem to want to budge? |