|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Driveshafts! » Post Reply
|
Nic Barnes |
posted on 10th Apr 10 at 22:48 |
quote: not cut mine down no. split shaft set up on driver side and passenger side is std calibra one after i snapped the conversion one. | |
gidged500 |
posted on 10th Apr 10 at 22:27 |
^^^^?????? | |
gidged500 |
posted on 10th Apr 10 at 01:28 |
Will the ones on that conversion kit be ok though?? | |
Rick Draper |
posted on 9th Apr 10 at 22:44 |
I have some GSI ones for sale with CV's to suit a big block gearbox. | |
Eddx14xe |
posted on 9th Apr 10 at 20:46 |
Did you cut them down or anything Nic? When i was looking at conversions, i read that they are 3mm too long and would have to be machined down to fit properly | |
Nic Barnes |
posted on 9th Apr 10 at 18:39 |
i have std calibra shafts in mine on both sides | |
gidged500 |
posted on 9th Apr 10 at 11:26 |
The kit I found has driveshafts with it are they not the ones to use ? | |
johnhara1 |
posted on 9th Apr 10 at 05:34 |
Either use Corsa GSi Shafts (they're 22 spline) with MK2 Cav 1.6 Inner CV Joints (to fit the gearbox) or buy the shafts in the kit as Eddx14xe posted. | |
gidged500 |
posted on 9th Apr 10 at 01:57 |
?? | |
gidged500 |
posted on 7th Apr 10 at 17:32 |
I found this one http://cgi.ebay.co.uk/CORSA-B-TIGRA-TYPE-2-2-0-ENGINE-CONVERSION-MOUNT-KIT-XE_W0QQitemZ360246228462QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item53e05935ee#ht_2158wt_722 if I get this one will I need anything g else?? | |
Eddx14xe |
posted on 7th Apr 10 at 14:52 |
http://www.lmfvauxhall.co.uk/store/product.php?productid=756&cat=1620&page=1 | |
Eddx14xe |
posted on 7th Apr 10 at 14:51 |
http://cgi.ebay.co.uk/CORSA-B-TYPE-1-2-0-ENGINE-CONVERSION-MOUNT-KIT-C20XE_W0QQitemZ160416526501QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item255991f0a5 | |
Eddx14xe |
posted on 7th Apr 10 at 14:49 |
If you get the conversion kit from ebay of LMF i thought you got the driveshafts with it? | |
gidged500 |
posted on 7th Apr 10 at 12:20 |
Hi i'm putting a redtop into my 1.4 sport I've got everything apart from the driveshafts and conversion kit going to buy the conversion kit a type 2 one. But the driveshafts what do I use I'm puzzled I can't use the 1.4 shafts for obvious reasons what ones will fit ?? Help please |