|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » changing a dizzpack c20xe to a dizzy » Post Reply
|
Alex_Rally |
posted on 16th Dec 09 at 16:43 |
sorry to butt in .... which is the best one to buy mate dizzy or coil pack engine ???? are they both 150bhp???? | |
evans_corsab |
posted on 15th Dec 09 at 17:45 |
its the bosch electric one :thumbs: | |
chrex |
posted on 15th Dec 09 at 08:27 |
if you cut the dizzy shaft then it wont do it any good. it will move about more than its likely to already. which dizzy is it? Electronic or vacuum advance? | |
davieslim |
posted on 13th Dec 09 at 23:45 |
as nick said only option would be to either change the cames over or change the loom and ignition set up to dizzyless | |
evans_corsab |
posted on 13th Dec 09 at 23:44 |
hmm dont really want to swap the cam :( , theres the hole for the dizzy shaft but it only goes in a tiny bit , may just hack the bar down :lol: | |
Nic Barnes |
posted on 13th Dec 09 at 23:41 |
change the cam is only option unless you fit the dispack and change the loom and ecu and afm etc to suit? | |
evans_corsab |
posted on 13th Dec 09 at 22:40 |
hi there , iv just had to buy a new head for my xe , thing is its running a coilpack , whereas my set ups for a dizzy , iv changed the pulleys to my old ones , but when i come to fit the dizzy theres the hole for the stud on the dizzy and the stabilizer shaft but it doesnt go in the cam as its like theres a ball in there , what should i do as i dont really want to change the cam . thanks |