|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » I KNOW THIS POST HAS BEEN DONE TO DEATH BUT PLEASE HELP !!! » Post Reply
|
wainey |
posted on 6th Mar 03 at 18:15 |
i had et47 offset wheels in 17's lowered 40mm, had to take out top two bolts and cut some of the plastic arch away, still scraped with people in the back, only on major potholes and high speedhumps though, was ok with 4 in car 5 was pushin it! oh my car is a sport so slightly lower then a standard corsa if thats of any use!:thumbs: | |
birdy_sri |
posted on 6th Mar 03 at 17:00 |
gud stuff cheers for the help lads, will i need to get the old angle grinder out or is -60mm and et48 gud enough ??? | |
Gambit |
posted on 6th Mar 03 at 10:29 |
all you will have to do is remove the top 2 arch bolts from each rear arch, 30min job max | |
Makarus |
posted on 6th Mar 03 at 00:21 |
Christ man, what offset you running to need mods like that on a 60mm drop with 15's??? | |
birdy_sri |
posted on 6th Mar 03 at 00:15 |
can anyone else shed sum light on the situation ?? | |
jmucorsasport |
posted on 5th Mar 03 at 19:43 |
With 17's on u will probably need soem arch work i'm slammed 60mm too on 15's an they had to take 10mm off my bump stops to stop the rubbing my wheels are et49 too:! | |
birdy_sri |
posted on 5th Mar 03 at 19:40 |
i aint modded my arches and wiv my standard 14"s on i dont get any scrubbage but will i def need to mod my arches wiv -60mm ??? | |
Leven Cruise |
posted on 5th Mar 03 at 19:37 |
Even tho they are et48.... with -60, you might get some scrubbge from the rear arches. | |
birdy_sri |
posted on 5th Mar 03 at 19:34 |
i can get hold of some kosei double racers in 17" but they are ET48, and my car is slammed 60mm, will i have anyscrubbage wiv ET48 offset ???:thumbs: |