|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Nova & corsa same driveshaft? » Post Reply
|
| d0gz_bollox |
posted on 3rd Mar 03 at 17:30 |
CV joint is removed by opening up the circlip inside the joint and pulling away from the shaft. 30 second job with a circlip tool from halfords @ £6.99 (or a 10 minute job with two small screwdrivers. lol) | |
| Speedi |
posted on 3rd Mar 03 at 17:15 |
No I ain't replaced the inner. Will it b the inner coz it mainly makes the noise when turning. I managed to change the CV joint, I had use of all the necessary tools at college including the tool to remove the clip! | |
| Adam |
posted on 3rd Mar 03 at 12:58 |
you can't repace CV's on their own unless you have special tools to do it :boggle: | |
| d0gz_bollox |
posted on 3rd Mar 03 at 12:54 |
did you try replacing the inner CV joint as well? | |
| Adam |
posted on 3rd Mar 03 at 12:48 |
Nova driveshafts are shorter than corsa ones by about 1-2"'s | |
| Speedi |
posted on 3rd Mar 03 at 11:57 |
The other week I heard a knocking coming from the n/s/f wheel & straight away thought it was CV joint. So I replaced the CV joint & the same knocking again. So I think it's a driveshaft or hub. A m8 of mine buys nova's 4 parts, so I'm thinking will a SR/SRI shaft be the same as on my 1400 sport? |