|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » would these fit a corsa b(wheels) » Post Reply
|
kevster |
posted on 3rd Mar 03 at 21:41 |
Go for a higher offset, or you will get scrubbing.Also suspension & bearings will wear out quicker !! | |
kevster |
posted on 3rd Mar 03 at 21:40 |
troublesome |
posted on 3rd Mar 03 at 20:57 |
id say your better off getting higher offset m8, its only gna cause problems if u wanna lower it, which is what most people do when they get wheels... so if ur planning to buy em i wouldnt advise u 2 | |
bluecorsasteve |
posted on 3rd Mar 03 at 20:46 |
ne1 | |
bluecorsasteve |
posted on 3rd Mar 03 at 18:51 |
anyone else | |
tobyD |
posted on 3rd Mar 03 at 12:25 |
i had a set of 16'' tsw edge ET40, lowered 40mm and i had no rubbing wotsoever. u shud be ok on ET38 but dont lower it too much, 30-40mm is ur limit. | |
Speedi |
posted on 3rd Mar 03 at 11:47 |
They will go on, but may catch at times. I've got a set of 7x15 League Tantrums on a 40 offset & it's lowered 35mm. If I have 1 passenger in the back they catch over slight bumps in the road. 7x16's won't catch if u get the right offset, the best offset is 49. | |
blueboy |
posted on 3rd Mar 03 at 10:56 |
7x16 isnt wide is it? | |
woz9 |
posted on 3rd Mar 03 at 10:55 |
Yea, they'll fit, is it lowered at all? They're wide for a 16" wheel. | |
bluecorsasteve |
posted on 3rd Mar 03 at 10:41 |
16" | |
Jodi_the_g |
posted on 3rd Mar 03 at 10:39 |
what inch are they | |
bluecorsasteve |
posted on 3rd Mar 03 at 10:25 |
they are et38 |