The Arches linings are a bastard to remove.
All the bits you have to undo are fairly straightforward.Its just getting the thing out.Prepare for a good hand mangling as you get pissed off with it.
I found brute force helped remove it and refit. There is nothing on them that you could snap. Unless your He-Man!!!
I found jacking the car up made it alot easier to get into the wheel Arch and get tools in to undo the bolts holding the Arches in place.

its all detailed in the haynes manual, if u dont have one get one, its a good investment, so useful.

just take the miidle 1 out then pull em out n bond em bak on

snap what clips :boggle:??

bumper-
2bolts under bonnet
2bolts under arch under the flap
2 jus below that
2 under the front on the corners
3 along the bottom of it

undo middle one under arch aswell to get bumper off

lining....
should be bout 4-5 thingies need removing
some turn and theres one u gotta push the lil plug thru before the bolt thing wil come out

^gotta remove the linin before u can get to the other bolts holdin the arch

easier after few goes times :look:

Just take the wheel off m8! p!ss easy!!;)

Im guessing youll have to remove plastic inner arches, how is this done? is there a nack to doing it without snapping the clips?

Cheers,

JJ