some have the wiring and some dont,

if you've got all the wiring inside the car then its easy (as said above)

If you havent got the wiring inside the car then your gonna have to be a bit creative and make your own wiring.

I had to do the same for the leccy windows in mine.
The haynes manual wiring diagrams are your friend

the interior loom (bit that runs to the connector in the A pillar) should be fine as i cant see vauxhall having a different interior loom for every corsa..

you'll need just the bit inside the door, and then all the trim work.. best bet is to go down scrappys and find a car thats got elecy windows and mirrors in the same colour (that hasnt had a bad accedent as hinges are welded into place and can be bent..)

then its a simple case of swopping them over

When you say the door loom, are you refering to the section that literally runs just in side the door? WOuld i be right in assuming that the section up to the door would be ok then?

need the door wiring loom off one thats got elecy windows and wing mirrors, then you just need to run the wiring for the switches that are in the OS door handle oh and you'd need the handles of a higher spec model

cant see that the interior loom would be different between models its just teh added extras

[Edited on 02-08-2009 by Richardhhha]

Hoping you guys might be able to assist. I have a pov spec 1.0 envoy on a W plate and want to fit electric mirrors. Whats involved in doing this, do i need to add any wiring or is it all there all ready?

At a later date i would also like to add electric windows. Is this very difficult?